emc filte r FS-A01D series 201 4 .02.18- a /2 page 1of 3 mornsun guangzhou science & te chnology co., ltd. reserves the copyright and right of final interpretation emc filter features z compact size z design to suppress the dc power surge to achieve primary protection z the attenuation coefficient of frequency meet 30db z cost-effective z low temperature rise z no reverse connect protection function z mounting: pcb mounting, chassis mounting with screw terminals, din-rail mounting rohs FS-A01D put on to the input of dc/dc module can substantially improve the ems performanc e of the module , FS-A01D put on to the output of dc/dc module can substantially redu ce the ripple and noise of the module. FS-A01D used with the mornsun dc/dc module, dc/dc module?s max. input voltage must less than FS-A01D?s max. voltage, dc/dc module?s max. input current must less than FS-A01D?s nominal current. selection guide model input voltage range (vdc) nominal current (a)(max) FS-A01D 0~40 0.6 note: series with suffix ?a2s? are chassis mounting, with suffix ?a4s? are din-rail mounting, for example FS-A01Da4s. general specifications item test conditions min. typ. max. unit operating temperature -40 -- 85 storage temperature -55 -- 125 storage humidity 5 -- 95 % casing temperature rise input current 0.6a -- 15 -- dcr input - output -- 600 -- m ? general specifications casing material black flame-retardant heat-proof epoxy resin (ul94-v0) package dimensions horizontal package 25.40x25.40x11.70 mm a2s wiring package 76.00x31.50x21.20 mm a4s rail package 76.00x31.50x25.80 mm weight horizontal package/a2s wiri ng package/a4s rail package 15g/35g/55g(typ) surge speci f ications item test conditions min. typ. max. unit attenuation multiples iec/en61000-4-5 2kv(2 ? internal resistance)/4kv(12 ? internal resistance) 30 -- -- db devise standard FS-A01D can ensure mornsun dc/dc converter modu le meet surge level of iec/en61000-4-5 2kv(2 ? internal resistance)/ 4kv(12 ? internal resistance).
emc filte r FS-A01D series 201 4 .02.18- a /2 page 2of 3 mornsun guangzhou science & te chnology co., ltd. reserves the copyright and right of final interpretation emc specifications input voltage waveform ( differential mode 2.09kv) output voltage waveform(17.1v) desi g n reference 1. inside schematic -vin +vin -vo +vo ld m + 2. typical application +vin gnd FS-A01D dc-dc converter +vout 0v FS-A01D fuse +vin -vin +vo -vo +vo -vo +vin -vin +vin gnd +vo 0v note:1. fuse:due to the difference of the po w er module input current, the fuse of the recommended valu es, please refer to the technical manual for the power module. 2. FS-A01D:add based on the actual apply. 3. for more information please find the application notes on www.mornsun-power.com fs- a 01d dimensions and recommended layout
emc filte r FS-A01D series 201 4 .02.18- a /2 page 3of 3 mornsun guangzhou science & te chnology co., ltd. reserves the copyright and right of final interpretation fs- a 01da2s dimensions fs- a 01da4s dimensions note: 1. packing information please refer to 'product packing information' . the packing bag number of hori zontal package : 58220014, the packing bag number of a2s/ a4s package:58220022; 2. unless otherwise specified, data in this data sheet should be tested under the conditions of ta=25 c, humidity<75%; 3. all index testing methods in this datasheet are ba sed on our company?s corporate standards; 4. the performance indexes of the product models listed in this manual are as above, but some indexes of non-standard model produc ts will exceed the above-mentioned requirements, and please dire ctly contact our technicians for specific information; 5. we can provide product customization service; 6. specifications of this product are subj ect to changes without prior notice. mornsun guangzhou science & technology co., ltd. address: no. 5, kehui st. 1, kehui develo pment center, science ave., guangzhou scienc e city, luogang district, guangzhou, p. r. china tel: 86-20-38601850-8801 fax: 86-20-38601272 e-mail: info@mornsun.cn
|
